Online Traceroute

About this tool

Trace the route packets take to a host from probes in different countries. Each hop lists the router that answered and how long it took, which shows where latency or packet loss enters the path. Measurements run on the Globalping network, so the test starts from a real location rather than from this server.

How to use it

  1. Enter a hostname or IP address, for example example.com or 1.1.1.1.
  2. Pick a starting location from the list of 33 countries, or leave it on All Locations to trace from several probes at once.
  3. Choose how many probes to use per location (1, 3, 5 or 10), then start the trace. Results arrive once every probe has finished.
  4. Read each hop's address, hostname where one exists, and round-trip times. Look for the hop where latency jumps and stays high.

How traceroute works

Every IP packet carries a time-to-live counter that each router decrements. When it reaches zero, the router discards the packet and, usually, sends back an ICMP Time Exceeded message. Traceroute exploits this: it sends a packet with TTL 1 and records which router replies, then TTL 2, and so on until the destination itself answers. The sequence of replying routers is the path, and the time between sending each probe and receiving its reply is that hop's latency.

Each hop is measured independently, which is why the times do not always increase from one hop to the next. A router that is slow to generate ICMP replies but fast at forwarding traffic shows a high time at its own hop and normal times afterwards.

Reading the results

The first hop or two belong to the probe's own network. The next few are its ISP, then a transit or exchange point, then the destination's provider, and finally the destination. Hostnames, where routers have reverse DNS, often encode the city and carrier, which makes the geographic path readable: a trace from Frankfurt that passes through hostnames containing ams and lon before reaching a US host is crossing to Amsterdam and London on its way across the Atlantic.

Latency that rises sharply at one hop and remains high for every later hop marks a long link or congestion at that point. Latency that spikes at one hop and drops back afterwards is almost always the router deprioritising its own replies and is not a problem for traffic passing through it. Asterisks mean no reply within the timeout; several in a row at the end mean the destination or its firewall drops the probes, while the service itself may be fine.

Comparing traces from different countries shows whether a slow path is specific to one region or one carrier, which is the difference between a server problem and a routing or peering problem.

Traceroute and MTR

A single traceroute is a snapshot. Packet loss at a hop may be a one-off, and latency varies from second to second. MTR and similar tools repeat the trace continuously and report per-hop statistics, which is better for intermittent problems. Running this tool twice a few minutes apart, or with more probes per location, is a reasonable way to check whether a result is stable.

Frequently asked questions

How does traceroute work?

It sends packets with increasing time-to-live values. Each router that drops a packet when the TTL reaches zero reports back, revealing itself as the next hop. Repeating this until the destination answers maps the whole path.

Why do some hops show asterisks or no response?

Many routers are configured not to send TTL-exceeded messages, or they rate limit them. A silent hop in the middle of a path is normal and does not indicate a problem if later hops respond.

Why run traceroute from another location?

The path to a server depends on where the test starts. Testing from several countries shows whether slow or failing hops affect everyone or only users in one region or on one carrier.

What does high latency at one hop mean?

A single slow hop that is followed by fast hops is usually a router that deprioritises replies, not a real delay. Latency that rises at one hop and stays high for every later hop points to a congested or long link at that point.

Where do the probes run?

On the Globalping measurement network, which has volunteer and hosted probes in dozens of countries. The location list offers 33 of them; All Locations samples several at once.